Compact Programmable AC Power Source - Single-Phase Source for ATE Racks and Component Testing
XGY AC203SP/AC205SP is a compact programmable AC power source series for Automated Test Equipment (ATE) racks and component testing. The 500 VA to 3 kVA single-phase models use DDS waveform generation, input/output isolation, key lock protection, shortcut voltage/frequency presets, and 300% overload capability for 2 seconds.
Key technical parameters for the AC203SP / AC205SP AC Power Source.
Input/Output Isolation & Key Lock
Application fit
Power products are rarely selected from one headline rating. The useful shortlist starts with the electrical envelope, DUT role, control interface and acceptance evidence.
Application fit
AC203SP / AC205SP AC Power Source should be scoped around Automated Test Equipment (ATE) racks, with voltage, power, interface, protection and acceptance requirements confirmed before quotation.
Application fit
AC203SP / AC205SP AC Power Source should be scoped around Component testing with a standard single-phase AC source, with voltage, power, interface, protection and acceptance requirements confirmed before quotation.
Application fit
AC203SP / AC205SP AC Power Source should be scoped around ATE cabinet installation, with voltage, power, interface, protection and acceptance requirements confirmed before quotation.
Application fit
AC203SP / AC205SP AC Power Source should be scoped around Compact single-phase AC source workflows, with voltage, power, interface, protection and acceptance requirements confirmed before quotation.
The AC203SP and AC205SP are compact programmable AC power sources delivering single-phase output from 500VA to 3kVA. Their standard 19-inch rack-mount form factor supports ATE cabinet installation for automated test racks and component testing.
| Model | Rated capacity | Output topology | Recommended role |
|---|---|---|---|
| AC203SP-500-1 | 500 VA | Single-phase 2-wire | Low-power components and compact ATE stations |
| AC203SP-1K-1 | 1 kVA | Single-phase 2-wire | General component validation and rack integration |
| AC205SP-2K-1 | 2 kVA | Single-phase 2-wire | Higher-load component and subsystem testing |
| AC205SP-3K-1 | 3 kVA | Single-phase 2-wire | Maximum-capacity configuration in this compact series |
All four models use DDS waveform generation, input/output isolation, key-lock protection, intelligent alarms, 110 V/220 V and 50 Hz/60 Hz shortcuts, soft start, and a standard 19-inch chassis. The published overload capability is 300% of rated load for 2 seconds.
Before selecting a model, define the DUT steady-state VA, startup or surge behavior, required voltage and frequency presets, rack space, isolation boundary, operator lockout needs, alarm handling, and the pass/fail evidence that the ATE controller must record. Choose the next capacity class when the expected transient or continuous load would leave insufficient operating margin.
XGY Tek specializes in tailoring power supplies to meet specific semiconductor, automotive, and aerospace testing requirements.
Get a QuoteFit check
Quote-stage checklist
Add the operating profile, safety boundary, control interface and acceptance evidence expected by the buyer before requesting final configuration and lead time.
Quote workflow
A useful RFQ is a short engineering model: operating envelope, DUT workflow, control boundary and acceptance evidence.
Send RFQStart with 500VA - 3kVA. Confirm the required model rating before treating the page summary as a released configuration.
Map the equipment to Automated Test Equipment (ATE) racks; Component testing with a standard single-phase AC source; ATE cabinet installation and record any transient, cycling, compliance or automation needs.
Confirm control interfaces, protection requirements, data logging, remote operation and the FAT/SAT evidence needed by the buyer.
This product page summarises AC203SP / AC205SP AC Power Source within XGY Tek's Power Supplies catalogue. Review the published specifications and application notes to determine whether the product matches the intended workflow.
Start with the values highlighted on this page: Power Range: 500VA - 3kVA; Phase: Single-phase, 2-wire; Waveform Generation: DDS waveform generation technology; Quick Settings: 110V/220V, 50Hz/60Hz. Check whichever selection criteria apply, such as measurement or operating range, resolution, accuracy, sensitivity, interfaces, software compatibility, environmental limits, accessories, and any stated test conditions. Not every criterion applies to every product.
Published applications include Automated Test Equipment (ATE) racks; Component testing with a standard single-phase AC source; ATE cabinet installation; Compact single-phase AC source workflows. Use the application notes as selection guidance, then confirm the required operating conditions, interfaces, software compatibility, and accessories against the published specifications.
Compare alternatives when the published measurement or operating range, resolution, accuracy, sensitivity, interfaces, software compatibility, environmental limits, or available accessories do not match the intended workflow. Confirm any critical value together with its stated conditions before selecting a configuration.
Use the Get a Quote form to share the application, required configuration, interfaces, accessories, documentation needs, and timing. XGY Tek will review the request before confirming a suitable configuration. A downloadable datasheet is linked from the product page.Get a Quote
Support scope is confirmed during quotation. Ask about commissioning, software integration, calibration documentation, acceptance requirements, training, accessories, spares, and service arrangements relevant to the application.About XGY TekWhere to Buy
XGY Tek specializes in tailoring power supplies to meet specific semiconductor, automotive, and aerospace testing requirements.
