RF & Wireless
RF & Wireless Test Solutions for 5G, Satellite, and Defense
XGY Tek supports engineering teams worldwide across the full RF, microwave, and millimeter-wave measurement stack — from sub-GHz IoT links through to W-band radar. The common challenge is selecting a signal chain that preserves phase noise, dynamic range, calibration traceability, switching paths, and reportable test evidence. We supply handheld field instruments, benchtop research-grade analyzers, and PXIe modular systems, with calibration documentation and RF support scope confirmed during quotation.
Application focus
RF teams use these when interference, spurious emissions, or wideband events are hard to catch. XGY spectrum analyzers support real-time capture, field troubleshooting, and lab-to-site RF validation.
Spectrum Analyzers
Spectrum analyzer platforms support interference hunting, spurious-emission checks, wideband event capture, and repeatable RF validation from the laboratory to field sites.
Application focus
Use when receiver testing stalls on source quality, phase noise, or repeatable modulation. XGY generators provide stable RF stimulus for sensitivity, radar, LO substitution, and automated wireless test.
Signal Generators
Precision signal generators provide stable RF stimulus for receiver sensitivity, radar, local-oscillator substitution, modulation, and repeatable automated wireless-device testing.
Application focus
Use when the RF path has to be characterised rather than only observed. The YNA-3674 series covers 10 MHz to 120 GHz with the ceiling set by the configured model.
Network Analyzers
Broadband coaxial vector network analysis to 120 GHz for S-parameter, filter, amplifier, cable, and multiport measurement, with the frequency ceiling set by the configured model.
Application focus
Use when EMC, antenna, or communications setups need more drive without losing control of the test. XGY RF amplifiers add high-power stimulus for validation, stress testing, and compliance benches.
RF Power Amplifiers
RF power amplifiers deliver controlled drive for EMC, antenna, communications, compliance, and device stress-testing benches that require higher stimulus levels.
Application focus
Use when measurement uncertainty comes from the setup, not the DUT. XGY RF cables, adapters, LISNs, and VNA accessories improve path stability, calibration confidence, and bench-to-field repeatability.
RF Accessories
RF cables, adapters, LISNs, and VNA accessories improve path stability, calibration confidence, and repeatability across laboratory benches and field test setups.
Application focus
Use when high-frequency research is blocked by sourcing separate multipliers, waveguide parts, and RF chain pieces. XGY THz modules support W-band extension, radar front ends, and mmWave links.
THz Modules
Terahertz modules support W-band extension, radar front ends, and millimeter-wave links for teams integrating multipliers, waveguide components, and RF-chain building blocks.
Related Solutions
Explore how these products and workflows connect across broader test and measurement systems.
Selection Guides
Read buyer's guides to choose the right instrument or system for your application.
Frequently Asked Questions
What RF and microwave measurements does XGY Tek cover?
Our portfolio covers spectrum, signal generation, network analysis, amplification, and mmWave conversion in a single integrated catalogue. Spectrum analyzers such as the YSA-P400 handheld (9 kHz – 40 GHz, 100 MHz RTSA bandwidth, 100% POI to 15 µs) and the YSA-U090 USB analyzer handle spurious, ACPR, EVM, and real-time capture workloads. Signal generators including the YSG-400B benchtop source (9 kHz to 40 GHz) and the YSG-P400 portable (200 MHz to 40 GHz) deliver CW and pulse-modulated stimulus; the handheld YSG-H060 adds vector and digital modulation to 6 GHz. Vector network analyzers (YNA-3674 series, 10 MHz to 120 GHz) characterise the RF path itself. RF power amplifiers like the XPA-0727-200 provide reverse-test stimulus, and our THz waveguide modules extend coverage into W-band and beyond.
Which RF & wireless applications are most commonly tested?
Common use cases include 5G NR FR1/FR2 conformance, future wireless research above 100 GHz, mmWave automotive radar, satellite TT&C and SATCOM ground-station integration, antenna and phased-array characterization, EMI/EMC pre-compliance (paired with our phase-stable RF cables and EM5040 LISN), IoT and LPWAN device verification, and defense electronic-warfare receiver testing.
Why source RF instruments through XGY Tek in Australia?
XGY Tek (XGY Pty Ltd, ABN 70 688 984 590) is an Australian distributor and developer with Adelaide HQ and a Sydney office. We assist with link-budget calculations, calibration plan design, PXIe chassis sizing, and on-site commissioning — all in AEST/ACST hours. For project-based RF rack builds and automated EMC suites, see our Custom Automation service or request a quote.