Application fit
R&D Bench DC Power
XDC100SA DC Power Supply should be scoped around R&D bench DC power, with voltage, power, interface, protection and acceptance requirements confirmed before quotation.
1Up to 360W0.1 mV / 1 uA
DC Power
XDC100SA DC Power Supply
Programmable Linear DC Power Supply - Low-Ripple Output for R&D and Validation
XGY XDC100SA programmable DC power supply series delivers 36W to 360W output across 12 models with low ripple noise, DVM capability, preset hotkeys, list mode, USB data logging, and waveform display. RS232 is standard, with optional USB, LAN, and RS-485 interfaces.
Core Specifications
Key technical parameters for the XDC100SA DC Power Supply.
Voltage
Up to 150V (model dependent)
Current
Up to 10A (model dependent)
Power
36W to 360W across 12 models
Ripple
<=5 mVrms, <=5 mArms by model
Interface
RS232 standard, optional USB/LAN/RS-485
Protection
OVP / OCP / OTP
Application fit
Match the power platform to the test workflow before quotation.
Power products are rarely selected from one headline rating. The useful shortlist starts with the electrical envelope, DUT role, control interface and acceptance evidence.
Application fit
Design Validation
XDC100SA DC Power Supply should be scoped around design validation, with voltage, power, interface, protection and acceptance requirements confirmed before quotation.
Up to 360W0.1 mV / 1 uAProgrammable DC
Application fit
Industrial Automation
XDC100SA DC Power Supply should be scoped around industrial automation, with voltage, power, interface, protection and acceptance requirements confirmed before quotation.
0.1 mV / 1 uAProgrammable DCUp to 150V (model dependent)
Application fit
Scientific Research And Education
XDC100SA DC Power Supply should be scoped around scientific research and education, with voltage, power, interface, protection and acceptance requirements confirmed before quotation.
Programmable DCUp to 150V (model dependent)Up to 10A (model dependent)
High Performance Programmable DC Power Supply
The XGY XDC100SA series comprises 12 programmable DC power supply models ranging from 36W to 360W, designed for R&D, design validation, industrial automation, scientific research, and education workflows requiring precise voltage and current control.
Output Characteristics
- Voltage Range: Up to 150V (model dependent)
- Current Range: Up to 10A (model dependent)
- Power Range: 36W to 360W across 12 models
Programming Interfaces
- Standard: RS232
- Optional: USB, LAN, RS-485
- USB Functions: data logging with USB extension and waveform curve display are listed in the datasheet.
Constant Voltage Mode Performance
- Load regulation: 0.05% + 5mV to 0.05% + 10mV
- Line regulation: 0.05% + 5mV to 0.05% + 10mV
- Ripple and noise: 3 to 5 mVrms by model
Protection Features
- OVP - Over Voltage Protection
- OCP - Over Current Protection
- OTP - Over Temperature Protection
Front Panel
- 4.3-inch LCD color display
- Rotary knob with fine/coarse adjustment
- Output on/off control
- USB extension support for data logging
Dimensions
- 230 x 110 x 395 mm
- Net weight: 5.6 to 9.9 kg (model dependent)
Typical Applications
- R&D bench power delivery - precise output with 0.1mV resolution for device characterization
- Design validation - stable linear-regulated output for repeatable DUT checks
- Industrial automation - RS232 standard connectivity with optional USB, LAN, and RS-485 interfaces
- Scientific research and education - affordable single-channel bench power with preset storage
Key Advantages
- Power Range 36W to 360W across 12 models
- Ripple <=5 mVrms, <=5 mArms by model
- Characterization List mode, USB data logging, waveform display, DVM, and preset hotkeys
- Protection OVP / OCP / OTP
- Interface RS232 standard, optional USB/LAN/RS-485
Performance Highlights
- Channels 1
- Power Up to 360W
- Key Spec 0.1 mV / 1 uA
- Type Programmable DC
Looking for a custom power supply solution?
XGY Tek specializes in tailoring power supplies to meet specific semiconductor, automotive, and aerospace testing requirements.
Get a QuoteControl Interface Scope
XDC100SA remote connectivity is listed as RS232 standard with USB, LAN, and RS-485 available as options. USB data logging and waveform curve display support are listed in the released datasheet.
RS232 standardOptional USB / LAN / RS-485USB data loggingWaveform curve display
Technical Resources
Fit check
Use this product when the requirement matches the published envelope.
Strong fit
- Projects centred on R&D bench DC power
- Projects centred on design validation
- Projects centred on industrial automation
- Requirements that benefit from Power Range and Ripple
Review alternatives
- Requirements outside the published voltage, current, power or frequency envelope
- Projects without a defined DUT, site power, interface or acceptance method
- Simple bench work where a lower-cost standard supply would meet the requirement
- RFQs that cannot yet specify protection, cooling, cabling or control boundaries
Quote-stage checklist
The fastest way to make the enquiry useful.
Voltage rangeCurrent / powerOperating modeDUT typeLoad profileControl interfaceProtection needsCooling / installationCable / fixture planCompliance workflowLead timeFAT/SAT evidence
Add the operating profile, safety boundary, control interface and acceptance evidence expected by the buyer before requesting final configuration and lead time.
Quote workflow
Make the test plan visible before the quote is final.
A useful RFQ is a short engineering model: operating envelope, DUT workflow, control boundary and acceptance evidence.
Send RFQ01
Confirm the electrical envelope
Ratings mapStart with Up to 150V (model dependent); 36W to 360W. Confirm the required model rating before treating the page summary as a released configuration.
02
Define the DUT workflow
Use-case briefMap the equipment to R&D bench DC power; design validation; industrial automation and record any transient, cycling, compliance or automation needs.
03
Lock the acceptance package
Quote evidenceConfirm control interfaces, protection requirements, data logging, remote operation and the FAT/SAT evidence needed by the buyer.
Frequently Asked Questions
What should buyers know about XDC100SA DC Power Supply?
This product page summarises XDC100SA DC Power Supply within XGY Tek's Power Supplies catalogue. Review the published specifications and application notes to determine whether the product matches the intended workflow.
Which published specifications should buyers compare for XDC100SA DC Power Supply?
Start with the values highlighted on this page: Voltage: Up to 150V (model dependent); Current: Up to 10A (model dependent); Power: 36W to 360W; Ripple: <=5 mVrms. Check whichever selection criteria apply, such as measurement or operating range, resolution, accuracy, sensitivity, interfaces, software compatibility, environmental limits, accessories, and any stated test conditions. Not every criterion applies to every product.
How should XDC100SA DC Power Supply be matched to an application?
Published applications include R&D bench DC power; design validation; industrial automation; scientific research and education. Use the application notes as selection guidance, then confirm the required operating conditions, interfaces, software compatibility, and accessories against the published specifications.
When should buyers compare another option in Power Supplies?
Compare alternatives when the published measurement or operating range, resolution, accuracy, sensitivity, interfaces, software compatibility, environmental limits, or available accessories do not match the intended workflow. Confirm any critical value together with its stated conditions before selecting a configuration.
How can I request a quote or datasheet for XDC100SA DC Power Supply?
Use the Get a Quote form to share the application, required configuration, interfaces, accessories, documentation needs, and timing. XGY Tek will review the request before confirming a suitable configuration. A downloadable datasheet is linked from the product page.Get a Quote
What support information is available for XDC100SA DC Power Supply?
Support scope is confirmed during quotation. Ask about commissioning, software integration, calibration documentation, acceptance requirements, training, accessories, spares, and service arrangements relevant to the application.About XGY TekWhere to Buy
Looking for a custom power supply solution?
XGY Tek specializes in tailoring power supplies to meet specific semiconductor, automotive, and aerospace testing requirements.